Mini Driver for Metal Mesh Atomizers

Part Number: SMUTK4W3ZP

Metal Mesh Atomizer Driver.
To connect the atomizer to the driver just solder the wire leads of the atomizer to the driver with the polarity as shown on the picture thumbnail above. Or, if you have the correct connector you can just plug it on the white socket. For production orders the connector and desired wire lads lenght can be provided.

Voltage Input: 5V DC
Suggested to be used with the following Metal Mesh Atomizers**:
SMMOD20F114H20
SMMOD20F114H30
SMMOD20F115H4
SMMOD20F115H4DS
SMMOD30F95H4
SMMOD20F113H7
SMMOD20F115H8
SMMOD14F135H6
SMMOD20F113H8
SMMOD20F135H20
SMMOD138F170
SMMOD30F100
SMMOD20F113H8

Applications: Nebulizer transducer, Aromatherapy mist generation transducer, Mist generation transducer for Hydroponic chamber, Humidifier transducer, Inhalation and disinfection equipments, Humidification in refrigerated food displays and storage, living environment and air conditioning plants, Hydroponics cultures, Humidification in industrial process, control for lubrication, coating, Piezo mister, Facial beautification, ICP instrument and others.

Notes:
*Typical values on laboratory testing. These values will depend on Voltage, water temperature, humidity and fan speed.
**This driver may not fully replace, in terms of maximum output volume, a driver specificaly designed for the Frequency, Impedance, Voltage and Capacitance of each mist transducer. It should be used only for proof of concept.