Atomizer Metal Mesh 20µm 114KHz

Part Number: SMMOD20F114H20

Metal mesh oscillator Transducer for mist generation. Liquids can also be feed to this transducer by capillarity. An application of this transducer is medicadiom delivery by aerosol Inhalation. Droplet size ~20µm.

If Silicone gasket is needed you can find it HERE

Piezo Material: SM412
Dimensions: 20mm Diameter
Resonant frequency fr: 114 KHz±5KHz
Resonant impedance Zm: ≤150 Ω
Static capacitance Cs: 6.5 ±1.5 nF @1kHz
Maximum Voltage Input: 60Vp-p (Sine wave signal with the same frequency as atomizer’s).
Number of Holes: 2700 ± 10%
Metal Mesh: SUS304 (29~31µm)
Mist Production:  250cc/Hr *
Wire Leads: 45mm UL 1571 30#
Working Temperatures: -10°C ~ +40°C
Test Condition: 25±3 °C 40~70% R.H.
Cs => LCR meter at 1KHz 1Vrms

Applications: Nebulizer transducer, Aromatherapy mist generation transducer, Mist generation transducer for Hydroponic chamber, Humidifier transducer, Inhalation and equipment disinfections, Humidification in refrigerated food displays and storage, living environment and air conditioning plants, Hydroponics cultures, Humidification in industrial process, control for lubrication, coating, Facial beautification, Transducer for drug and medicine deliver by mist, Inhalation aerosol, ICP instrument and others.

Notes: The surface with black wire towards the liquid. Driving voltage should be（40~60）Vp-p. Using Sine signal with a frequency same as atomizer’s.

*Typical values in our laboratory testing results, these values will depend on drive circuit and fan speed.
   Measurements were done with the atomizer floating on the surface without water covering the top side of the transducer.